Temple tips are the contact pieces at the ends of the arms. Replacing a worn or damaged pair can restore grip and comfort, but the replacement must match your USWING model and be installed without twisting the frame.

Before you begin

• Confirm that the replacement tips are compatible with your exact frame.
• Work over a clean microfiber cloth so the lenses and small parts are protected.
• Keep heat, sharp tools and household lubricants away from the frame.

Replacement sequence

1. Hold the temple arm close to the existing tip so force is not transferred through the hinge.
2. Following the direction shown in the video, ease the old tip off with steady, controlled pressure. Do not bend or sharply twist the arm.
3. Check the exposed end for damage and wipe it clean with a dry microfiber cloth.
4. Match the orientation of the new tip to the other side, then press it on straight and gradually.
5. Compare both sides and try the eyewear on. The tips should sit evenly without creating a pressure point.

If the tip does not move with gentle pressure or your model uses a different attachment, stop and contact USWING support.

Return to Adjustments.